1, if the band saw everything is normal, when using, must change the saw blade in sawing inclined, then most likely problem is out on the saw blade, general quality factors mainly saw blade is larger. This kind of circumstance commonly can be confirmed by changing the method of band saw blade, also is the replacement of different batches of the band saw blade for cutting.

 

2, confirm the specifications of the band saw blade is exactly the same as that of before. Such as tooth type, tooth pitch, width, thickness, etc.

 

3, if after excluding the saw blade, then consider the factors of the cutting parameters. , feed and other factors, such as blade tension requires attention.

 

If above questions are ruled out, it will have to consider whether or not the band sawing machine in the maintenance period Also has a life band sawing machine accessories, after all, who also don't know when it will appear problem.

 

About the band saw saws and factors that were not just look at the following equipment accessories.

 

1, the distance between guide block

 

2, guide arm gap

 

3, sawing jig is longitudinal vertical 90 degrees

 

4, Lord, if driven belt wheel clearance is too large.